technical data sheet rpc-1.85 right angle jack pcb 08K243-40ME3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 rf_35/05.10/6.1 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h interface according to iec 61169-32 mechanically compatible with rpc-2.40 documents pcb layout b 208 material and plating connector parts material plating center contact cube gold, min. 1.27 m, over chemi cal nickel outer contact brass gold, min. 0.8 m, over chemica l nickel dielectric peek dielectric ptfe screws stainless steel
technical data sheet rpc-1.85 right angle jack pcb 08K243-40ME3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 rf_35/05.10/6.1 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg f(ghz) electrical data impedance 50 w frequency dc to 70 ghz return loss 3 15 db, dc to 26.5 ghz 3 12 db, 26.5 ghz to 70 ghz insertion loss 0.05 x db insulation resistance 3 5 g w center contact resistance 4.0 m w outer contact resistance 2.5 m w test voltage 500 v rms working voltage 150 v rms rf-leakage 3 100 db up to 1 ghz - connector only, vswr in application depends decis ive on pcb layout - mechanical data mating cycles 3 500 center contact captivation: axial 3 20 n coupling test torque 1.65 nm recommended torque 0.80 nm to 1.10 nm environmental data temperature range -55c to +125c thermal shock iec 61169-1, subclause 9.4.4 corrosion iec 61169-1, subclause 9.4.6 vibration iec 61169-1, subclause 9.3.3 shock iec 61169-1, subclause 9.3.14 moisture resistance iec 61169-1, subclause 9.4.3 max. soldering temperature iec 61760-1, +260c for 10 sec. rohs compliant tooling n/a suitable cables n/a weight 4.9 g/pce draft date approved date rev. engineering change n umber name date martin moder 16/02/10 herbert babinger 23.03.15 b0 0 15-0399 a.youmsi mouafo 31.03.15 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judg ed to be necessary.
|
